Our standard anaerobic chamber with state of the art features.

Our standard anaerobic chamber with state of the art features.

Options and Specs Images and Video
 

The A35 is the first workstation to be offered with our new glove/sleeveless system. Sample manipulation within a secure anaerobic environment is now as easy as working aerobically on the laboratory bench. The working and storage areas of the chamber are temperature controlled with an impressively low gradient throughout. This allows the full internal volume to be used as an incubator if desired.

Another major advantage of the sleeveless system is that it uses eight times less gas when entering the workstation compared with a conventional porthole system. The airlock is flushed with nitrogen as an additional cost-saving.

To introduce samples or equipment, the built-in, 12 liter, rapid-cycle airlock has the capacity to introduce up to 40 Petri dishes into the workstation in 60 seconds. There is also the option to specify the 15cm letterbox, ideal for quickly transferring all sizes of dishes and small items.

Whatever your application, we can tailor the Whitley A35 Workstation to your requirements. For example, if you want to be able to use electrical equipment inside the chamber, you could include the option of a built-in, interior electrical socket. If you require the ability to thoroughly sanitize your workstation between experiments or need to introduce large items of equipment, you may want to specify the removable front option.

A35 Front Options

From a relatively small footprint we have been able to maximize incubation capacity to create the perfect environment, whether for a few plates or hundreds of plates.

Download Brochure
Standard Anaerobic Workstation

Features:

No gloves, no sleeves - complete bare-handed working
Automated humidity control with no user maintenance
Rapid, built-in airlock with mechanical and electrical interlocks - no risk of compromising conditions inside the chamber
Touch-screen interface with password protected user levels
Dual gas operation and automatic commissioning cycle
Constructed from 10mm thick annealed acrylic, most robust chambers available
Tangential fans create laminar flow in chamber, internal atmosphere is constantly being circulated over catalyst, Anotox, and heating mat for a consistent and strictly anaerobic environment
Double internal power socket, 2 Amp max
Accommodates up to 600 plates with ample work space, three porthole doors
Gas requirements: 1 x ANO2 = 10% H2, 10% CO2, 80% N2 -OR- 1 x ANO2 and Nitrogen
No requirement to bake catalyst, simply replace catalyst and Anotox annually
Available removable front that can be removed and replaced in 30 seconds without the use of tools. This allows for thorough cleaning or installation of larger equipment
The Whitley A35 is available with custom port options. The two ports can be either rapid entry or conventional sleeved ports by choosing the removable front option.
 

Options:

Anaerobic Conditions
Monitoring System
This factory-fitted option monitors and displays real time oxygen levels within the workstation. Depending on the percentage of oxygen present, the chamber/airlock symbol on the touch screen will read green, yellow or red. The electronic Anaerobic Conditions Monitoring System is complete with oxygen sensor and a special software package. The oxygen sensor is located inside the chamber for accurate, real-time readings. The sensor is easily and quickly calibrated via the touch screen.

See Details


Gas Pressure Monitor
Designed as a method of monitoring the gas supply. The system will indicate the status of both sides of the switchover: FULL – IN SERVICE, and DEPLETED. When a cylinder or cylinder bank is depleted, the green light will change to a red light, and the audible alarm will sound.
See Details

15cm Letterbox
Ideal for quickly introducing small quanitites of samples and supplies

Spare Cable Gland
Used to accommodate a power or data cable without affecting the chamber conditions

Data Logging
Access temperature, humidity, chamber pressure and anaerobic conditions. Stores up to 30 days of system information, accessed via USB port.

Trolley
Custom-designed trolley frees up bench space and allows the chamber to be moved

Internal Storage Trays
Maximum 2 per unit; positioned under the shelf

10 Plate Dish Rack
Easily stack and move 10 petri dishes. Prevents spills with a rigid design

Specs:

Capacity (Liters) 300
Capacity (Petri Dishes) 400 - 600
Port/Airlock Capacity 40 x 90mm Petri dishes
Airlock Size 12 liters
Refrigeration Not available
Airlock Cycle Time 60 seconds
Automatic Dehumidifier Fitted as standard
Removable Front Option Available
Dimensions (w/d/h - mm) 1255 x 720 x 710
Weight (lbs/kg) 220 / 100
Temperature Range (°C) 10°C above ambient up to 45°C
Porthole System Manual or Instant Access Ports

Images and Video

Image Gallery

A35 Gallery
Click image to enlarge
 

Featured Videos

Dr Jane Freeman from Leeds General Infirmary

Whitley Workstations – Optimal conditions for C diff

Removable Front

Removable front

Whitley Workstation download data

Downloading Data