The USDA Food Safety Inspection Service (FSIS) is the public health agency in the U.S. Department of Agriculture responsible for ensuring that the nation’s commercial supply of meat, poultry, and egg products is safe. The USDA-FSIS facility in Alameda, CA tests meat, poultry and eggs produced by factories across the country. They regulate foods such as hams, hotdogs; any type of cooked or Ready-To-Eat (RTE) material. These products are tested for the main human pathogens: Salmonella, E.coli, Listeria and E.coli O157:H7. The USDA-FSIS Alameda’s Western Laboratory has been using Systec MediaPrep automated media sterilizers since 2004 for all its media-making needs.

Brooks Wong - USDA

Maria Mariscal (left) and Brooks Wong from USDA FSIS in Alameda, CA.

They are producing large quantities of BPW and TSB enrichment broths. MediaPrep is a fully automated system for media sterilization and dispensing, with active cooling to provide fast cycle times for busy laboratories. MediaPrep is available in seven sizes ranging from 10L-120L. The USDA Western Lab has one MediaPrep 10, three MediaPrep 120s and one MediaFillTM automated plate pourer. Pairing the MediaFill with the MediaPrep allows maximum flexibility for creating diluent and agar plates as quickly as needed. Microbiology International recently sat down with Brooks Wong, supervisor of the Microbiology Department of the USDA-FSIS’ Alameda laboratory to discuss use of the MediaPrep and MediaFill systems and how the equipment has affected its daily process.

In what way does the Microbiology lab use both of these instruments to carry out daily operations at the USDA-FSIS?

Microbiology International (MI)

We use several types of media in our operations, so it is key to have different instruments available to make different media at the same time. For instance, we use a very high volumes of BPW and high volumes of TSB broth.

Brooks Wong - USDA(BW)

You mentioned BPW and TSB, but can you tell me what kind of liquid media types you make, roughly what those volumes are, and why such high volumes?


The main media we make in high volume is BPW and TSB. We will make 100L at a time, so we utilize the MediaPrep120s; and we make about 500L a week of each. Our sample is a 1 to 10 dilution. A typical sample we cut up from the factory is 350g; so a 1 to 10 is 3 liters. So we use a lot! And we’ll get maybe 37,000 samples a year. So you can imagine how much media we use here at the Western Laboratory.


Liquid Culture Media
Systec MediaPrep

Systec Media Sterilizer

Plate Pourer

Systec Automated Plate Pourer - MediaFill

How has using the MediaPrep system benefited your day-to-day operations?


If there is any critical need for the BPW or TSB, or need for use of the MediaFill, we can usually get that out in a four hour window and hopefully use it and test with it the next day. So it is very flexible for us. We have a regular schedule of production, of course, but if there is a high volume week and we use too much of BPW or TSB we can increase one or the other in an instant.


How has the MediaFill Plate Pourer benefited your daily operations?


Again, it adds to our flexibility. We can produce different types of media for plates right away instead of trying to order from an outside vendor that could take a while. It gives us a lot of flexibility of time. Instead of waiting for an ordered case of plated DLMA, for example, we can go ahead and just utilize the smaller MediaPrep10 and MediaFill Plate Pourer and get our product out in three to four hours and ready to run. We are also using the 100x15 mm MediaPro plates from Microbiology International and they run very smoothly in the MediaFill.


Why did you choose the Systec MediaPrep and MediaFill equipment over the competitive system available?


It’s an economical system. It allows us to buy media in bulk. The system works VERY well for us in that regard. They are easy to use and they are reliable.


What is your overall impression of the support and service of Microbiology International, which distributes this equipment?


We have a service contract with Microbiology International. Whenever we have a problem we just call in and the service rep for Microbiology International comes out in a timely manner. He assesses the problem and gets our user input to discern what is going on. He knows the instruments inside out. He recommends solutions, orders parts and fixes the units to get us back on our feet quickly.


Would you purchase additional units if the need arose and would you recommend these units to other facilities?


Currently we have an MP10, two MP120s, and a MediaFill already in operation. We have already ordered and have received an additional MP120 that we will install at our new facility. So we will have a total of three MP120s ready for action. I would absolutely recommend these units to other facilities. We are one of three USDA- FSIS labs and I always recommend these systems to my other two labs. My other two labs each have at least one MP120 in operation from Microbiology International.

USDA Media Preparation

USDA's two MP120's capable of a 120 liter media run per cycle.

Like what you see?

See more information about our Systec Media Sterilizer and Systec MediaFill Plate Pourer.